New room

Define the room, its serviced walls, and the equipment schedule. All dimensions in millimetres.

Start from a preset

Room shape & dimensions

WidthDepth

Trace from a drawing — optional

Upload an existing plan (JPG/PNG/PDF page 1), calibrate with two clicks on a known dimension, then switch the room shape to Custom and trace the walls over it. The underlay is a visual guide only — it is never saved or exported.

Serviced walls

Wall 0 — Bottom

Click a wall on the plan, then toggle the services it provides. Drag doors along their wall and drag zones (corner handle resizes). Drag the square handle on a wall to move it; add notches to shape the room. Fume cupboards need extract; showers need water and drainage.

AI layout assistant

Describe your lab

Need a starting point?

Add details (optional)

Lab typePeopleWorkflows (comma-separated)Hazards (comma-separated)

Uses the room and walls defined above. The suggestion is validated, repaired, and compliance-checked by the same rule engine as every generated layout — it appears as an extra candidate you can inspect or discard. Design-intent only; a qualified professional must validate against local codes.

Doors

Windows

Wet / chemical zones — optional

Equipment schedule

Item	W×D mm	Worktop
Linear bench	Customize
Island bench	Customize
Peninsula bench	Customize
Sink cabinet	Customize
Write-up seating	Customize
Fume cupboard	Customize
Microbiological safety cabinet	Customize	—
Tall cabinet	Customize	—
Overhead cabinet	Customize	—
Emergency shower	×	—
Eyewash station	×	—
Combined shower + eyewash	×	—

Design-intent only. A qualified professional must validate against local building, fire, and civil-defence codes before procurement or construction.